Category

Roof Installation

Proper Roof Installation | Remember Me Roofing

Why is Proper Roof Installation Important?

By | Roof Installation | No Comments

Table Of Content:

The day your roof is installed is the most important in its life, and it establishes the foundation for your roof’s entire future. If properly placed, your roof’s future is bright and lengthy. However, if a roof is poorly installed, the future of your roof will always result in premature roof failure.

Remember me? Roofing recognizes that proper roof installation is the most important aspect of getting a new roof installed, and it shows in our workmanship.

Never shy away from educating the public or our customers; I will explain what an improperly installed roof is, what causes it, and why sound roof installation is crucial in this piece.

What exactly is a roof that has been inadequately installed?

When all roofing components, accessories, and materials are correctly installed utilizing the required roofing techniques, the roof is considered correctly installed. If even one component of the roof is placed incorrectly, the process of premature roof failure will begin.

A poorly installed roof is simply one that has been established utilizing the wrong roofing principles and without following the manufacturer’s specifications.

Unfortunately, if one portion of the roof is poorly installed, you can expect that other parts are also installed wrongly. It doesn’t simply happen to age roofs that need to be replaced; it occurs significantly more in new home construction.

What causes a faulty roof installation?

When a roof is placed incorrectly, issues may arise the first time it rains. Poor workmanship, insufficient attic ventilation, faulty nailing, and poor weather conditions during installation will always cause a roof to fail well before its time.

  • Poor workmanship

Poor workmanship. Every time a roof is installed incorrectly, you can be sure it was done by a roofing contractor who was either lazy, took shortcuts to save time and money, didn’t care about performing a good job, or just didn’t know what they were doing. All of these factors contribute to poor craftsmanship. Unfortunately, in today’s fast-paced society, examples of shoddy workmanship are all too often.

  • Inadequate attic ventilation

Your ventilation system is an essential component of your roof. When a contractor installs a roof, the first thing they do is make sure the attic is adequately aired.

If your installer does not ensure that your attic is adequately ventilated, your roof will fail early. The damage produced by trapped cold and hot air will drastically reduce the life of your roof and may even violate the manufacturer’s guarantee. Inadequate ventilation can cause a roof to deteriorate in as little as two years.

  • Inadequate nailing

The nailing of your roof’s shingles is more important than you might think. If the shingles are raised and the nail heads are found lying horizontally, your roof was put up incorrectly. They will stay tight as long as the nails are pushed in straight and with the proper pressure.

The location of nails is also essential for a successful installation. The manufacturer’s guarantee will be void if a nail is not placed on the shingle’s nail line. If the nails were driven in incorrectly and not correctly placed, leaks would appear all over your roof.

Check out this post on hand vs. air gun nailing to discover more about how to correct nailing affects your roof.

Roof Installation | Remember Me Roofing

What is the significance of appropriate roof installation?

Now that we’ve discussed an improperly installed roof and what causes it, we’re ready to discuss why a good installation is essential to you. Factors such as long-term cost, roof longevity, and peace of mind will demonstrate why having your roof professionally constructed is vital.

You’ll be spending less money. While a new roof may be expensive upfront, it is nothing compared to the costs you would pay if the roof is incorrectly built. These charges can quickly build up, especially if you hire a contractor who doesn’t offer workmanship warranties or anything else to protect your investment.

Rooftop living. The life of your roof is simply the number of years you can expect to get out of the roof system you choose. Because a roof system is an expensive investment, you should expect it to last a lifetime. Roofs with a life expectancy of 50 years or more are available on the market today.

Warranties from the manufacturer. When it comes to manufacturer warranties, you can bet they’ll do all they can to avoid paying for repairs or a new roof. The first thing they’ll examine is whether or not the roof system was installed correctly. A manufacturer may refuse to honour a guarantee due to something as simple as incorrectly positioned nails.

Mindfulness. When a roof is poorly installed, the question is not if it will leak, but when it will leak. You now have a huge headache that you were not expecting. The last thing you want to think about is a leaking roof and the damage it causes every time it rains.

Do you truly need them, and how essential are they to your home

Do You Know Why Fascias and Soffits Are Important?

By | Roof Installation, Roof Replacement, Soffit & Fascia | No Comments

Table of Contents

When you’re constructing or remodelling your house, you may be performing some exterior maintenance or fixing your roof when you come across a quotation for fascias and soffits. You may not understand what they are or why you need them.

Do you truly need them, and how essential are they to your home?

Fascias, the horizontal ends you can see on the outside of your house, complemented by the soffits, which are just beneath the rafters and are still vital, giving you a nice look and many other advantages.

These items protect the outside of your house. They minimize the possibility of animals, such as birds and squirrels, gaining access to your rafters, which may result in expenditure on your part to remove them after they have built their nests and made a home in your roof.

Furthermore, fascias and soffits reduce the danger of rain being blown inside the house. Depending on how the wind blows in your region, it may throw up the rain at an angle, and if these items were not in place, the damp could easily make its way into your roof, causing damp in specific parts of the house over time, something you want to prevent at all costs.

Fascias and soffits are now available in various materials ranging from wood to UPVC; the one you select is based on personal taste and the style of your house. Most homes will seek the most eco-friendly alternative since they do not want to affect the environment negatively. The good news is that we may paint wood to match the outside finish of the house, while UPVC is available in a variety of colours.

Always consider the maintenance aspect of things. When it comes to fascias and soffits, you should do semi-annual maintenance. The good news is that they are extremely simple to maintain, and if you have selected wood, a fresh coat of paint when you paint your house can keep them looking beautiful for years to come.

Check your fascias and soffits for wasp and bee nests. While they help keep animals out, they also serve as a home for wasp and bee colonies. If this occurs, contact a professional as soon as possible to have the issue resolved and the hive removed.

When purchasing fascias and soffits for your house, you must select the highest quality. If you are installing them on your own as a weekend DIY project, be sure to purchase an additional length to ensure you have plenty in case you make a mistake and to leave a little extra length on each cut for the corners.

If you hire an installation professional, talk to them ahead of time to obtain their opinion on the material to use and get a quotation to set your mind at rest.

Look online for your fascias and soffits; you can frequently get them for a little less money and have them delivered to your door, saving you a lot of time and energy. Inquire with your supplier about whom they suggest for installations; occasionally, smaller businesses will carry out the installation for you, ensuring that the work is done correctly and of the highest quality.

How Fascias and Soffits Can Keep Your House Safe

Many homeowners are depressed as a result of leaking roofs. Any repair seems to be just temporary since the building begins to deteriorate again after a few years. 

What is the source of the problem?

Your roof is continuously subjected to the effects of the elements. It must be able to resist direct sunshine as well as rain or snow. The building is safe as long as the water is properly drained. On the other hand, any moisture management issue leads to decay and ruin of your property.

Fascias and soffits play an important function in draining moisture from your roof's structure.

Fascias and soffits play an important function in draining moisture from your roof’s structure. While the term may seem strange, you have most likely seen these boxes beneath the roof that encircle the home. They are a component of guttering. For starters, fascias hold the gutters in place. It is essential that the water goes down the drainage pipe rather than splashing on the roof. Second, they gather moisture and assist it in evaporating via the soffits on the structure’s bottom. Your roof will stay safe as long as the system functions properly.

What is it that appears to go wrong so frequently?

Water spills over the edges of the roof boards if the gutters get blocked with fallen leaves or the drainage line becomes clogged. They absorb moisture and begin to decay and lose form. The damage spreads through all of your roofing layers at this point. Rainwater begins to seep inside. If you don’t halt the procedure, you may lose a lot of money.

Why weren’t your roof’s planks waterproof?

Wood seems to be the most common roofing material, particularly on older homes. After a few years of enduring nature’s wrath, protective layers of paint begin to flake away. Finally, the rainfall soaks into the wood, and the damaging process begins. The fascias are intended to safeguard the structure. The wooden ones, on the other hand, begin to decay as well. To keep your house safe, you must fix the structure.

Homeowners often choose the cheapest and quickest service providers to repair their leaky roofs. However, the damaged portions must be removed before putting the new covering, and any leaks must be sealed. Otherwise, the rot will continue to wreak havoc within the building, even though it seems to be in good condition on the outside. Choose contemporary fascias and soffits made of uPVC to prevent degradation. As long as the structures are correctly installed, this safe material may help your roof endure for years.

Check the gutters and drainage lines at least once a year to prevent damage to the structure. Remove any decaying organic debris from the interior to ensure proper water flow. When you detect a problem with your roof, act quickly; a fast response may be the difference between a simple repair and a costly restoration of the whole roofing system. You don’t have to deal with leaks all the time anymore. To safeguard your property, install a safe and attractive drainage mechanism.

What is more essential a roof or a good quality roof

Is Your Roof in Danger? Do you need Roofing Installation and Repair?

By | Roof Installation, Roof Repairs, Roof Replacement | No Comments

Table of Contents

What is more essential, a roof or a good quality roof?

“A quality roof” is self-evident. Let’s start with what we truly want in roofs: longevity, strength, and, most importantly, excellent materials. People build homes to keep things secure, and it is even more essential to install excellent roofing for added security. When discussing the cost, stability, and quality, we mainly refer to the quality roofing people want when installing a new roof. Currently, technology is evolving fast to provide people with what they need at affordable rates. Everyone desires a home that is both contemporary and appealing. When we consider all of the components of a home, the roof is one of the most important. The roof is an essential part that includes the foundation, walls of a home, windows and structural components of a complicated building system.

The lifetime of any roof, whether it is on your home, hospital, commercial structure, malls, retail stores, schools, and so on, is determined by the quality of the installation work, the climate, and the quality of the material used. Roofs are considered complicated constructions that may require the installation of several feature levels. A little mistake may lead to massive devastation. It is very hazardous to attempt to put a roof on your home without prior knowledge and expertise. As a result, it is essential to employ a professional that can handle all of the specifics from start to finish. An expert roof installer can advise you on the best roofing material to use throughout the installation procedure. They can do their job while keeping your belongings secure and tidy.

When it comes to business roof repair, installing metal roofs has increased in recent years due to various benefits. It is generally simple to guarantee that roofing installation and repairs are completed on time before they become major issues. This will ensure that the life of the roofing is extended while saving you money on the frequent repairs required due to negligence. Various materials, such as tiles, metals, and bricks, are needed throughout the roofing installation process. 

Metal Roof Installation Tips

The first step in metal roofing installation is to choose the appropriate material for the project. These may include fasteners, decking, flashing suitable for the pitch of your current roof, framework, and metal roof panels. Having a thorough design before you go out and buy the supplies for the project will assist you in determining what hardware you’ll need as well as the number of roofing panels you’ll require. If you put metal roofing on the old roof, you may require furrow strips or asphalt paper between the two roofs. You should also make sure you have collected all the tools you need in advance to guarantee you get all the essential things done correctly and promptly. It is also essential that you read and follow the manufacturer’s installation instructions before starting the job carefully.

You must first assess the existing pitch of the roof to guarantee adequate drainage from your roof. The reason for this is because various metal roofing panel designs have varying roof pitch requirements. Once you’ve determined the pitch of your roof, you may choose from the many designs available for that pitch. If the roof’s pitch is low, you may need extra sealant and hardware to provide a waterproof roof. Metal roofing installation may be done with either internal or exterior fasteners, although external fasteners are more convenient. The kind of flashing, trimmings, and fasteners used will be determined by the roofing panels you choose.

Metal roofing installation requires the following tools

Metal roofing installation requires the following tools:

  • Eye protection
  • Fastening tools
  • Gloves with a good grip
  • A cordless drill with a fastener attachment may suffice for minor roofing projects, but larger roofing work requires a specialized impact driver.
  • To cut across the panel ribs, you may just need a nibbler attachment for your cordless drill or power saw with a metal-cutting carbide blade. The magnitude of the work determines it.
  • To cut around obstacles, use tiny hand-held metal snips that may use with either the left or right hand.

Panels should be placed from the peak or gable downward when installing metal roofing. It should be in the opposite direction as the winds that bring the rain. You may expedite the installation by pre-drilling the sub-roof to accommodate the fasteners.

When constructing or repairing a roof, it is critical to constantly strive to use the most up-to-date technology. The old one must first be removed and then the waste disposed of and a new one applied before a new roof was built. In all situations, this guarantees your roof is weather resistant. In addition, it is important to use qualified and experienced professionals in roof installation if you want to construct a quality roof that will protect you and your family for years to come.

Things to Consider When Repairing Your Roof

Things to Consider When Repairing Your Roof

By | Roof Installation, Roof Repairs, Roof Replacement | No Comments

Table of Contents

Even though the roof is an essential component of any structure, many individuals avoid making repairs. However, you should never put off repairing your house or business’s roof. Regardless of the kind of roof in question, address identified issues as soon as possible. Delaying repairs ensures that they will grow more difficult and costly.

The following pointers will assist you in making your roof repair tasks safer and simpler.

Learn About Roof Types and Weather Effects

Understanding the distinctions between roof types will make any job for roof repair easier and safer. There are a number of criteria and physical properties of each roof type governing the repair process. Even local weather may affect the restoration of the roof. As an example:

Wooden shingles are best to deal with while slightly wet since they become brittle when dry. Plan wood shingle repairs for cold days, such as the day after a little rain has soaked the shingles.

On the other hand, asphalt shingles are overly flexible in hot weather, very brittle in cold weather and slippery in wet weather—schedule asphalt shingle repairs on days when the temperature is mild.

Shakes and shingles are common materials for roofing but are likely to break apart and must be replaced frequently. To be in place, shakes and shingles must be fixed. None of your substitute components require a hammer. Keep a panel in front of the pounding shake to prevent damage.

Be Aware of Roofing Safety Hazards

Roof repairs may be risky. Shingles may be dangerously slippery. Sharp slopes increase the likelihood of a fall. Know what to anticipate when it comes to roofing safety risks. The safety of everyone on the roof should be ensured by precautions. Here are several the several safety measures:

  • Make use of safety harnesses. Connect them to a reliable anchoring system.
  • Wear appropriate work shoes with soles intended to grip the roofing materials.
  • Inspect the roof for loose shingles, slick slopes, and sheathing holes. Do this before starting any work procedures.
  • Never go on a roof during a rainstorm or snowfall, or soon after either.

Consider Hiring a Professional Roofing Contractor

These suggestions may simplify and increase the security of your modest roof repair work. However, sometimes a professional roofing contractor has to be hired. Special expertise and equipment are needed for major dress repairs or roof replacement. The expertise, know-how and equipment to repair or substitute your roof are available for professional roofing contractors.

Plan repairs to your roof. Take into account the job, related insurance problems and the necessity to provide expertise. Set up professional assistance if you need it. And never allow problems with the roof to remain unsolved.

Tips for Temporary Emergency Solutions

As a householder, you must act immediately to avoid the problem of deteriorating and endangering your family’s lives if you are in a situation where your roofing assembly requires urgent roof repair. Inclement weather, such as continuous showers and high gusts of various degrees of severity, may seriously damage your roof. Consequently, your roof is more prone to fail and sustain damage such as cracks, holes, loosened fasteners, and leaks. Emergency repairs are required, and the best option is to contact a skilled roof repair contractor right soon. You should get acquainted with a business that is available 24 hours a day, seven days a week in an emergency.

What can you do if you do not contact or wait for the roofing contractor to arrive

What can you do if you do not contact or wait for the roofing contractor to arrive?

If you have any leaks within your home, you must fix the issue using plastic sheeting, sealants, and water containers. To prevent dangerous encounters, do not try to conduct roof surveillance at night. You and your helper may examine the roof assembly as soon as the weather allows, ideally during daylight, to make a preliminary assessment of the roof damage. Equip yourself with the required tools to film and photograph the state of your roof.

In the event of an emergency, you should keep certain essential tools, equipment and roofing materials at your disposal such as a garden plant, compressor, ladder, hammer, spreadsheets, metal sheets, roof flashing, measurement tapes, tapers, nails, staples, pads, pads, rubber sheets, emergency waterproof sealants, plates, taped ducts, etc. You should also keep certain basic instruments and materials on hand. View “how-to videos” and study articles on emergency roof repair work on the web, books, and magazines to acquire some fundamental technical know-how for do-it-yourself roof repairs.

After you’ve completed the immediate interim measure, you’ll need to bring in a dependable roofing expert. To make urgent repairs, you’ll need the knowledge, abilities, resources, and equipment of a highly experienced emergency team. Remember that the services of a qualified roofing contractor are important when filing insurance or roofing material manufacturer’s warranty claims for permanent roofing repair solutions. Similarly, they may give you the required supporting papers, such as the itemized scope of work and repair services, pricing, photographs, videos, and drawings.

These contractors typically provide the following roof repair services:

  • Reparation of storm and wind, repairs of leaks, repairs of flash
  • Reparations of fascia
  • Sales Clean-up
  • Skylights
  • Chimneys
  • Repair of drainage system
  • Repair of the roof and roof tiles
  • Recovery of the roof
  • Glazing and painting again
  • Ripening of mortar repairs and loosening
  • And so on and so on

In an emergency, every second matters. Suppose the damage to your roof is severe. In that case, you will need the services of a reliable team of professional roofing contractors that can come to your location at any time of day or night to conduct an emergency roofing repair.

The New Residential Metal Roofing Trend

The New Residential Metal Roofing Trend

By | Metal Roofing, Roof Installation, Roof Repairs, Roof Replacement | No Comments

Table of Contents

Steel roofs are common on barns, but how frequently do you see them on residential property? It’s quite probable that you’ll see a lot more of them throughout the nation. With wildfires, hurricanes, hail, and other severe weather events causing damage to homes, a growing number of homeowners are reaping the advantages of metal roofing.

Steel roof installations have more than doubled in the past five years and are expected to increase at a rate of 15% each year. There is no other material capable of shielding a house from damaging weather conditions.

Benefits of Metal Roofing

Durability

At least two to three times or 40-60 years is used for a metal roof. In warm climates, metal is highly impervious to the ugly mildew stains that often develop on asphalt shingles. A metal roof, when properly constructed, will not leak or corrode and can resist wind gusts of up to 140 miles per hour.

Protection

Most metal roof systems have passed the UL 2218 Impact Resistance testing at the most severe level, Class IV. Consequently, homeowners in hail-prone areas who select metal roofing may be eligible for insurance premium reductions.

Environmentally Friendly

Metal roofs may be recycled if they are ever removed. The durability of metal eliminates the need for regular roof replacements. Even better, it may be installed over the existing roof, saving money on shingle removal and landfill fees.

Steel is the ideal material to use in “green” structures when the aim is to minimize or eliminate chemicals. Unlike wood shakes or other conventional materials, steel is not susceptible to insects, mildew, or decay. As a result, it does not need the use of pesticides or other harmful chemicals.

Benefits of Metal Roofing

Energy Efficient

Metal roofs have been shown to conserve energy and decrease cooling expenses by up to 40%, depending on the region. The introduction of new reflecting paints with energy-saving characteristics has completely transformed the residential roofing business.

While asphalt and cedar shingles absorb heat, the new cool pigment technology may reflect up to 85 percent of the radiant energy from the sun. Even dark hues may now be considered “cool.” An Energy Star roof may remain up to 100 degrees cooler on its surface than conventional roofs, allowing less heat to enter the structure.

Low Maintenance

A metal roof will not deteriorate, fracture, curl, split, rot, or lose impact resistance as it ages. A metal roof requires a yearly inspection, cleaning the roof of collected leaves or other debris, and inspecting rooftop ancillaries like air conditioners to verify that they are properly drained and maintained.

Aesthetics

Some people still associate the old, unsightly metal barn roofs with a negative connotation. However, a slew of new colours, coatings, and profiles have significantly enhanced the appearance during the past decade.

Be Wary of Your Warranty

Finding a warranty that provides full coverage is more difficult than most customers think. No method can be determined if two metals are of different degrees, lying close to one other. Scrupulous manufacturers may claim a guarantee period of 25 years before their deterioration for low-cost metals, which lasts for five years.

Because of this danger, it’s critical to locate a manufacturer that includes the coil numbers of its steel suppliers on their warranties, which links the customer with the vendor and the actual metal bought. This ensures that the guarantee is completely fulfilled for the length of its term. You have no protection if your warranty does not include the coil number, regardless of what your guarantee says.

A Long-Term Investment

The cost of a metal roof, which is two to three times that of a shingle roof, is often one of the obstacles to buying one. Buyers who understand that a metal roof is a one-time investment rather than a continuing, life-long cost, on the other hand, recognize the significant value it provides.

Due to deterioration, asphalted roofs are typically replaced every 15 years. On the other side, a metal roof is a permanent roof that is extremely inexpensive.

The Final Solution

The fast rise in the number of metal roofs installed in the Country Is expected to continue as customers get a greater understanding of the durability and both immediate and long-term savings that metal roofs provide. 

 

Why You Should Always Work With a Local Roofer

Why You Should Always Work With a Local Roofer

By | Roof Installation, Roof Repairs, Roof Replacement | No Comments

Table of Contents:

 

Working with a skilled roofer is always a good idea, whether you’re having your roof patched up or replaced. While all roofing systems are built to withstand the elements, they are not indestructible and will require regular maintenance, repairs, and maybe replacement when the time comes. If you need any form of roof work done, it is always advisable to hire a local roofing company. But why is it preferable to recruit someone from the neighbourhood? Additionally, limiting your options to local roof repair providers is a good idea. This isn’t simply for the sake of convenience; it’s also for the sake of practicality. Remember Me Roofing, one of Ottawa’s most reputable roofing businesses, explains why.

Learn why it’s critical to hire a local roofing contractor

Learn why it's critical to hire a local roofing contractor

You Can Verify Their Reputation

It’s much easier to verify or examine the reputation of a contractor you’re considering working with if they’re well-known in your neighbourhood. Your neighbours may have already worked with them, and you may use their experiences as references to help you make your decision. The majority of local roof repair and installation companies genuinely care about the areas in which they operate. They are not aiming to earn quick cash but rather to establish long-term business connections. They realize that you’ll be more likely to refer them to friends and family who need roofing repair done if they perform a good job. 

Knowledge of Building Codes

Local roofers are also familiar with the nuances of the local construction codes. Residential roofing systems should all be installed to the highest standards, regardless of whether they are asphalt or metal. Because building rules differ from city to city, you should engage with a local contractor to ensure that your new roof meets the most current building requirements. State-by-state differences in building codes and other legalities exist. A local roofing company will be more knowledgeable about local construction requirements and standards. 

In comparison to someone from out of state, they’ll know what materials will work best in your climate. You can live in a location where severe storms or strong winds are expected. A local roofer will be familiar with this and will construct your roof in such a way that it will survive longer.

The Climate in the Area

When planning a roofing job, the weather is a crucial issue to consider. As a result, the contractor you’ll be dealing with should be aware of the climate in your location. Local roofers like us are familiar with the environment in Ottawa, so we’ll always recommend the best climate-friendly product, materials, and system for your home.

Availability

Finally, think about the closeness and availability of your prospective roofer. Working with a local roofer means you won’t have to wait days for your project to be completed, and you’ll always be first in line. Consider a situation in which you have issues with a newly built roof. If you hire someone from another state, it may be challenging to resolve any concerns that arise after the first task is completed. If you choose someone local, it may just take them a few minutes to get to your location in the event of a problem or an emergency with your roof.

If you live in the areas in and around Ottawa and are looking for a trusted local roof replacement company, then you’ve come to the right place.

For all your roof-related needs, be sure to give Remember Me roofing a call at 613-854-7663. From home roof replacement to business flat roof repair, we provide a full range of roofing services.

Roof Installation Services

Roof Installation Services That Are Guaranteed to Last

By | Roof Installation | One Comment

Table Of Content:

Roof Installation

Understanding the roof installation process and steps will help you ensure your new roof is properly installed, whether you hired a professional or plan to do it yourself. Here’s a quick rundown of how to install metal roofing and asphalt roof shingles.

Get the best price, get roofing price quotes from at least four pre-screened and licensed roof repair and installation professionals before beginning your project. To get an idea of how much your roofing installation will cost, use our contact form and talk to local contractors.

You will better understand the process if you know what to expect from your roof installation. When your roofing contractor comes to install or replace your roof, here’s what you can expect.

Remove the Old Roofing

Before the new roofing material can be installed, the old roofing will most likely have to be removed. Many people will layer multiple roofing layers on top of one another to save time, but too many layers (such as asphalt shingles) can cause the roof to fail prematurely. The old roof should be stopped and rebuilt down to the sheathing.

Evaluate the Roof

Examine the sheathing after removing the old roof. Roof sheathing is made up of flat panels that serve as structuralRemove the Old Roofing support and a foundation for roofing materials such as shingles. Look for any damp or troublesome areas that will need to be replaced.

Protect Against Ice

Suppose you live in an area where ice forms for even a portion of the year, an ice and water barrier should be installed around your roof. This product is applied to the roof’s edges, particularly the very bottom edge, which is the most prone to ice buildup. This sticky underlayment adheres to the roof sheathing before being nailed down with roofing nails for added strength and stability.

Put on the Drip Edge

The roofing drip edge is installed in two parts of the roof installation. It goes on before the underlayment on the lower part of the roof and after the underlayment on the sides of the roof. Install the metal drip edge over the ice and water barrier along the bottom border of your home first. Nail it flat against the roof with a nail gun.

After you’ve installed the roof underlayment on your home, you’ll need to go over it with a drip edge on the sides, just as you did at the bottom. This keeps water from running over the siding’s edge and back underneath it.

Roofing Underlayment Installation

Whether felt paper or synthetic, Roof underlayment is saturated in water-repellent materials and is available in two thicknesses: 15# and 30#. Although the 30# underlayment is twice as durable as the 15#, the synthetic products outlast both felt paper options. Invest in the more expensive synthetic underlayment if you want the most effective way to protect your roof aside from the roofing itself; it’s the most convenient and durable option.

Roll the underlayment along the roof’s edge and secure it with cap roof nails every four inches on the outside edges and every eight inches in the center. Instead of going through the drip edge, these cap nails should sit just above it.

Roll out one row of roofing underlayment at a time, securing it all with roofing cap nails and ensuring that the lower row overlaps the next row by at least six inches. Install a row straddling the peak of the roof so that the underlayment caps off both sides of the roof at the same time.

Roof Replacement

Roof Repairs

New Builds

Skylights

Eavestrough Install

Venting Upgrades

Inspections

Metal Roofing

Other Services

Roofing Products

About Us

Real Estate